2021 STIHL In-Tree Saws MS 201 T C-M

2021 STIHL In-Tree Saws MS 201 T C-M

The MS 201 T C-M offers a superior power-to-weight ratio for optimal maneuverability and performance for in-tree work. This chainsaw features the STIHL M-Tronic' intelligent engine management system that automatically adapts to changes in environmental factors such as fuel quality and altitude. The result is a reliable and fuel-efficient chainsaw that performs optimally in a variety of conditions. Featuring a new simplified starting procedure and top handle, the MS 201 T C-M offers reduced operator fatigue, increased comfort, and much-needed balance. Professional jobs will be easier with use of the STIHL MS 201 T C-M – the ultimate arborist chainsaw.”

Features may include:

• This product features M-Tronic' (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.

• The built-in carry handle makes it convenient and easy to maneuver in and out of trees.

• The top-handle model is specially designed for in-tree professional use only!

• The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.

• The Master Control Lever' is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever' to the choke position.

• The IntelliCarb' Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb' uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb' system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the dirty” side of the air box.

• The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.

• STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.

• The Ematic' guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.