2023 Generac Power Systems BI-FUEL' Generator SB500
2023 Generac Power Systems BI-FUEL' Generator SB500
500kW BI-FUEL' GeneratorSince Generac BI-FUEL' generators run primarily on natural gas, which is cheaper than diesel, fuel costs are significantly reduced over the long term. Since every component is manufactured in-house, these generators are EPA-compliant from the factory. With a reduced carbon footprint, these generators help businesses achieve their eco-friendly goals.
Features may include:
GENERATOR ENCLOSURE- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
- Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
- Generac's BI-FUEL' generators are fully integrated solutions, not after-market conversions in the field.
Engine
- Displacement:927.56 in3 (15.2 L)
- Engine:Piston Type: Aluminum | Crankshaft Type: I-Beam Section
- Bore:5.39 in (137 mm)
- Stroke:6.73 in (171 mm)
- Fuel system:Specifications: ASTM | Filtering (Microns): Primary 10 - Secondary 2 | Pump Type: Engine Driven Gear | Engine Type: Pre-Combustion
Dimensions
- Oil Capacity:Crankcase Capacity: 47.55 qt (45 L)
- Dimensions:Fuel Supply Line: 0.5 in (12.7 mm) NPT | Fuel Return Line: 0.5 in (12.7 mm) NPT
- Emissions:EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
- Alternator:Model: WEG | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <3% | Telephone Interference Factor (TIF): < 50 | Standard Excitation: Permanent Magnet Excitation | Bearings: Single Sealed Cartridge | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25%
- Lubrication:Oil Pump Type: Gear | Oil Filter Type: Full Flow
- Electrical:System Voltage: 24 VDC
- Hydraulic Flow:Maximum Required Volume of Natural Gas Needed: 45 cfm
- Governor:Electronic Isochronous | Frequency Regulation (Steady State): ±0.25%
- Engine Manufacturer:Perkins
- Cooling:Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Centrifugal Type, Belt-Driven
- Cylinder Liners:6 | Cylinder Head: 4-Valve
- Fan Diameter:36.5 in (927 mm)
- Fan Speed:Cooling: 1,658 RPM
- Engine Type:In-Line | Intake Air Method: Turbocharged/Aftercooled
- Fuel Injection:Pump Make: Electronic | Type: MEUI
- Compression Ratio:16.0:1
- FUEL TYPE:Ultra Low Sulfur Diesel #2
- Maximum Pressure:Required Natural Gas Pressure: 1 psi
- Battery:Size: See Battery Index 0161970SBY | Voltage: (2) - 12 VDC | Ground Polarity: Negative
Other
- Manufacturer Type:General