2023 Generac Power Systems BI-FUEL' Generator SB600
2023 Generac Power Systems BI-FUEL' Generator SB600
600kW BI-FUEL' GeneratorGenerac BI-FUEL' generators meet the on-site fuel requirements for emergency systems as referenced in NEC700 and NFPA 110, and they have the only EPA compliant engine right from the factory. Since less diesel is used, they have fewer emissions and a smaller carbon footprint compared to diesel only.
Features may include:
GENERATOR ENCLOSURE- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
- Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
- Generac's BI-FUEL' generators are fully integrated solutions, not after-market conversions in the field.
Engine
- Displacement:1,106.36 in3 (18.13 L)
- Engine:Piston Type: Aluminum | Crankshaft Type: I-Beam Section
- Bore:5.71 in (145 mm)
- Stroke:7.20 in (183 mm)
- Fuel system:Specifications: ASTM | Filtering (Microns): Primary 10 - Secondary 2 | Engine Type: Pre-Combustion
Dimensions
- Oil Capacity:Crankcase Capacity: 47.55 qt (45 L)
- Dimensions:Fuel Supply Line: 0.5 in (12.7 mm) NPT | Fuel Return Line: 0.5 in (12.7 mm) NPT
- Emissions:EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
- Alternator:Model: K0792124Y23 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <3% | Telephone Interference Factor (TIF): < 50 | Standard Excitation: Permanent Magnet | Bearings: Single Sealed Cartridge | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25%
- Lubrication:Oil Pump Type: Gear | Oil Filter Type: Full Flow
- Electrical:System Voltage: 24 VDC
- Hydraulic Flow:Maximum Required Volume of Natural Gas Needed: 50 scfm (15 m3 /min)
- Governor:Electronic Isochronous | Frequency Regulation (Steady State): ±0.25%
- Engine Manufacturer:Perkins
- Cooling:Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Centrifugal Type, Belt-Driven
- Cylinder Liners:6 | Cylinder Head: 4-Valve
- Fan Diameter:38 in (965 mm)
- Fan Speed:Cooling: 1,658 RPM
- Battery Charger Type:Alternator: 70 Amps
- Engine Type:In-Line | Intake Air Method: Turbocharged/Aftercooled
- Fuel Injection:Pump Make: Electronic | Type: MEUI
- Compression Ratio:14.5:1
- FUEL TYPE:Ultra Low Sulfur Diesel #2
- Maximum Pressure:Required Natural Gas Pressure: 1 psi (7 kPa)
- Battery:Size: See Battery Index 0161970SBY | Voltage: (2) - 12 VDC | Ground Polarity: Negative
Other
- Manufacturer Type:General