2023 Generac Power Systems Diesel Generator 10 kW – 30 SD030
2023 Generac Power Systems Diesel Generator 10 kW – 30 kW SD030
30kW Diesel GeneratorWeird stuff happens…a rodent gets into a transformer, a construction worker takes out a power line, but at the same time you need to stay in business. Generac's line of diesel generators keep your facility operating, no matter the cause of the power disruption.
Features may include:
GENERATOR ENCLOSURE- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
Engine
- Displacement:135 in3 (2.22 L)
- Engine:Piston Type: Aluminum | Crankshaft Type: Forged Steel
- Bore:3.3 in (84.0 mm)
- Stroke:3.9 in (100.0 mm)
- Fuel system:Specifications: ASTM | Filtering (Microns): 5 | Pump Type: Engine Driven Gear
Dimensions
- Oil Capacity:Crankcase Capacity: 11.2 qt (10.6 L)
- Dimensions:Fuel Supply Line: 0.31 in (7.9 mm) | Fuel Return Line: 0.2 in (4.8 mm)
- Emissions:EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
- Alternator:Model: K0035124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase Only) | Telephone Interference Factor (TIF): < 50 | Standard Excitation: Synchronous Brushless | Bearings: Single Sealed | Coupling: Direct via Flexible Disc | Load Capacity - Standby: 100% | Voltage Regulator Type: Digital | Number of Sensed Phases: All | Regulation Accuracy (Steady State): ±0.25%
- Lubrication:Oil Pump Type: Gear | Oil Filter Type: Full-Flow
- Electrical:System Voltage: 12 VDC
- Governor:Electronic Isochronous | Frequency Regulation (Steady State): ±0.5%
- Engine Manufacturer:Perkins
- Cooling:Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Pre-Lubed, Self Sealing
- Cylinder Liners:4 | Cylinder Head: Cast Iron
- Fan Diameter:18 in (457 mm)
- Fan Speed:Cooling: 1,980 RPM
- Engine Type:In-Line | Intake Air Method: Turbocharged
- Fuel Injection:Pump: Distribution Injection Pump | Type: Mechanical
- Compression Ratio:23.3:1
- FUEL TYPE:Ultra Low Sulfur Diesel Fuel #2
- Battery:Size: See Battery Index 0161970SBY | Voltage: 12 VDC | Ground Polarity: Negative
Other
- Manufacturer Type:General